Linear AKR-1 Uživatelský manuál Strana 11
- Strana / 20
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
9
Typical Toggle Mode Wiring
For devices triggered by a normally open circuit, wire the contacts of the Main
and Auxiliary Relays in parallel (see the Figure below). Either relay will be able to
trigger the access device. Entry codes programmed for the Auxiliary Relay will be
able to hold the output on.
Select Door Sense or Inhibit Input Default: Door Sense
The input on Terminal #14 can be programmed for DOOR SENSE or INHIBIT.
Press: 1 0 # Input#
Input = 0 for Door Sense, = 1 for Inhibit
When programmed for DOOR SENSE, if an open condition on the input occurs
before access is granted (with an entry code, transmitter or with the request-to-
enter input) a FORCED ENTRY output will occur. If an open condition remains 60
seconds after a relay activation for access, a DOOR AJAR output will occur.
When programmed for INHIBIT, a closed condition on the input will prevent
Relay #1 from activating when access is requested (with an entry code or
transmitter). This mode is typically used with an external timer to disable the
access device at certain times.
Select Forced Entry Output Default: Output #3
Sets which output activates if the DOOR SENSE input opens before access is
granted. This output is not timed.
Press: 1 1 # Output #
Output = Output to Activate (0-4)
1 = Relay #1 2 = Relay #2 3 = Output #3 4 = Output #4 0 = No Output
Select Door Ajar Output Default: Output #4
Sets which output activates if the DOOR SENSE input stays open 60 seconds after
access is granted. This output is not timed.
Press: 1 2 # Output #
Output = Output to Activate (0-4)
1 = Relay #1 2 = Relay #2 3 = Output #3 4 = Output #4 0 = No Output
Select Keypad Lockout Output Default: No Output
Sets which output activates when the keypad is “locked out” after too many
incorrect entry code attempts. The lockout time is 60 seconds.
Press: 1 3 # Output #
Output = Output to Activate (0-4)
1 = Relay #1 2 = Relay #2 3 = Output #3 4 = Output #4 0 = No Output
Select Keypad Active Output Default: No Output
Sets which output activates when any keys are pressed. This output is timed. If
toggle mode is selected for the output, the timer value defaults to 2 seconds.
Press: 1 4 # Output #
Output = Output to Activate (0-4)
1 = Relay #1 2 = Relay #2 3 = Output #3 4 = Output #4 0 = No Output
217350 D IMAGE 11
N.O.
COMMON
N.C.
N.O.
COMMON
N.C.
MAIN
RELAY
AUXILIARY
RELAY
AKR-1
OUTPUTS
ACCESS
DEVICE
EITHER RELAY CAN TRIGGER
THE ACCESS DEVICE
- Digital Keyless Entry System 1
- CONTENTS 2
- PRODUCT DESCRIPTION 2
- FEATURES 3
- INSTALLATION 3
- COMPONENT LOCATIONS 4
- WIRING DIAGRAM 5
- PEDESTAL 6
- MOUNT BACKPLATE WITH 6
- SECURITY BOLTS AND LOCKNUTS 6
- Gate Control 7
- Door Control 8
- 217350 D IMAGE 9 9
- Press: 1 0 # Input# 11
- Press: 1 1 # Output # 11
- Press: 1 2 # Output # 11
- Press: 1 3 # Output # 11
- Press: 1 4 # Output # 11
- 217350 D IMAGE 12 12
- 217350 D IMAGE 13 13
- Press: 7 3 # Output # 14
- Press: 7 4 # Output # 14
- Press: 7 5 # Output # 14
- Press: 7 2 # Output # 14
- Master Reset 15
- Resetting the Master Code 15
- Solid State Outputs 15
- Beeper Sound Level 16
- Locking Keypad 16
- AKR-1 OPERATION 17
- MGT Supervisory Mode 18
- SPECIFICATIONS 19
- LINEAR LIMITED WARRANTY 19
- IMPORTANT !!! 20
- FCC NOTICE 20
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Linear AKR-1
(8 stránky)Hoist Fitness HF4459 manuels
Manuels d'utilisation et guides de l'utilisateur pour Sports et loisirs Hoist Fitness HF4459.
Nous fournissons des manuels en pdf 1 Hoist Fitness HF4459 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentáře k této Příručce