Linear 1050 Uživatelský manuál stáhnout pdf

OPERATIONAL CHECK

To check operation, move back a reasonable distance (about 50 ft.) and press the

transmitter button. Operation should be reliable at this distance but

environment and location of both the transmitter and receiver will affect the

range. If the transmitter is stowed well out of sight, it may be necessary to

remove it from its mounting and hold near the windshield. Try different locations

and positions. If operation is still unsatisfactory, the problem may be isolated by:

Checking the door operator.

If the door will not open when the wall button is

pressed, the problem is likely to be the operator. If the door will open by pressing

the wall button, but not when the radio control button is pressed, the problem is

probably in the radios.

Replacing the transmitter battery.

If after performing the above operational

checks, the controls still do not function, they should be returned to your dealer for

repair or replacement.

CAUTION:

Any changes or modifications in intentional or unintentional

radiators which are not expressly approved by LINEAR CORPORATION could

void the user’s authority to operate this equipment. This applies to intentional

and unintentional radiators certified per part 15 of the F.C.C. rules and

regulations.

LINEAR CORPORATION

2055 Corte del Nogal • Carlsbad, CA 92009

(760) 438-7000

INSTALLATION INSTRUCTIONS

DIGITAL TRANSMITTER MODEL 1050

Congratulations! You have just purchased a Linear Digital Transmitter, which we

believe to be the finest product of its kind on the market. With a little care this

transmitter should provide you with many years of excellent service. Please take a

moment to read the following instructions and you will find that setting your new

transmitter will be quite an easy matter.

ACCESSING THE CODE SWITCH

On the model 1050 the side of the transmitter is removable. Squeeze the ends

of the transmitter case or twist a coin in the slot provided, then pull the side to

remove it. This will expose both the code switch and battery compartment.

INSTR,INSTL,MC1050,1CH,XMTR

LINEAR P/N: 216908 A

INK: BLACK

MATERIAL: 20 LB. MEAD BOND

SIZE: 9.000" x 3.500"

SCALE: 1-1

SIDE 1 OF 2

1 2

Shrnutí obsahu

Strany 1

OPERATIONAL CHECKTo check operation, move back a reasonable distance (about 50 ft.) and press thetransmitter button. Operation should be reliable at t

Strany 2

SELECTING A CODEYou may set your transmitter to any code you desire but be sure that the code youset matches the code that has been set on your radio

Komentáře k této Příručce

Žádné komentáře

Linear 1050 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Satelit Linear 1050. Linear 1050 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Satelit Linear 1050